Insignia NS-LCD15-09CA, User Manual

Page: 9 / 40

7
Insignia NS-LCD15-09CA 15" LCDTV 720P
www.insignia-products.com
For HDMI —Plug one end of an HDMI cable
into the HDMI (1) jack on the back of your TV,
then plug the other end into an HDMI device.
2 Turn on your TV.
3 Press INPUT to open the input source menu,
press or to select the external signal
source you want to watch, then press
ENTER .
4 Turn on the external signal source.
5 Insert a disc or videotape into the external
signal source, then press
PLAY .
Connecting a computer
You can connect a computer using the HDMI or
VGA jack on the back of your TV.
To connect a computer using VGA:
1 Plug a VGA cable from your computer into
the
VGA jack on the back of your TV.
2 Plug an audio cable from your computer’s
audio out jack into the
AUDIO jack on the
back of your TV.
3 Plug in and turn on your TV.
4 Press INPUT to open the input source menu,
press or to select VGA , then press
ENTER .
To connect a computer using HDMI:
• Plug an HDMI cable into the HDMI INPUT
jack on the back of your TV and into the
HDMI Out jack on the back of the computer.
Using your TV
Turning your TV on and off
To turn your TV on and off:
1 Make sure that the power cord is connected
to your TV and a power outlet.
2 Press to turn on your TV. The power
indicator LED turns blue.
3 Press again to return your TV to standby.
The power indicator LED turns red.
Warning
Make sure that you turn off and unplug your TV
before installing devices.
Note
When the computer goes into standby mode, your
TV turns off. If your TV does not turn on when you
“wake” your computer, press the
POWER button
on your TV or remote control.
4
5
6
VGA cable Audio cable