6
NS-IR10BK6
www.insigniaproducts.com
Steam ironing
The steam feature can only be used at higher ironing temperatures. Use the following
settings:
Use for moderate steam
Use for maximum steam
1
Open the water inlet cover and fill the iron with water.
2
Stand the iron upright and plug it in.
3
Turn the temperature control dial to the setting you want.
4
The temperature indicator turns off when the temperature you want is reached. The
iron is ready for use.
5
Turn the steam control to the required position. Steam starts coming from the holes
in the sole plate.
Choosing the water
• This iron can be used with normal tap water.
• If the water in your area is particularly hard, use distilled or demineralized water.
• Do not use chemically descaled water or any other liquids.
Filling the iron
1
Set the steam control knob to 0 and the temperature control dial to OFF.
2
Unplug the iron from the wall outlet and wait for the iron to cool down.
3
Pour water into the water inlet up to the MAX level of the water reservoir.
4
Plug in your iron and stand it upright.
5
Turn the temperature control dial to the desired temperature setting. The
temperature indicator turns on.
6
When the correct temperature is reached, the temperature indicator turns off. The
temperature indicator turns on and off periodically when the iron turns on or off to
maintain the set temperature.
Spraying the fabric
You can use the spray feature at any time to help eliminate wrinkles. It does not affect the
temperature of the iron.
1
Open the water inlet cover and fill the iron with water.
2
Aim the spray nozzle at the garment.
3
Press the spray pump.
Note:
With conventional steam ironing, water may leak from the sole plate if you have
selected too low a temperature. If this happens, turn the temperature control dial to a
higher setting. Steam will be produced as soon as the appropriate temperature has
been reached.