5
www.insigniaproducts.com
Full Motion Mount for TVs 47" - 80"
Installation instructions
STEP 1 - Determine whether your TV has a flat back or an
irregular or obstructed back
1
Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from
damages and scratches.
2
If your TV has a table-top stand attached, remove the stand. See the documentation that came with your
TV for instructions.
3
Lay the
TV brackets
, oriented vertically, on the back of your TV.
4
Align the screw holes in the TV brackets with the mounting screw holes on your TV.
5
Identify which type of back your TV has:
•
Flat back
: The brackets lay flush against the back of your TV and do not block any jacks. You do not need
spacers when assembling the wall mount.
•
Obstructed back
: The brackets block one or more of the jacks on the back of your TV. You will need
spacers when assembling the wall mount.
•
Irregularly-shaped back
: There is a gap between a bracket and some part of the back of your TV. You
will need spacers when assembling the wall mount.
6
Remove the TV brackets.
NS-HTVMM1703-C_16-0801_MAN_V6_EN.fm Page 5 Tuesday, October 11, 2016 10:26 AM
