Insignia NS-DXA1, User Manual

Page: 9 / 42

7
Insignia NS-DXA1 Coupon Eligible Converter Box
www.insignia-products.com
Manually adding channels
If you need to add a channel that was not found
during the channel search, you can add the
channel manually.
To manually add channels:
1 Press MENU . The SETUP menu opens.
2 Press or to select Manual Tuning , then
press or . The Channel Edit menu opens.
3 Select the channel you want to add, then
press .
4 Repeat Step 3 to add more channels.
Using the on-screen menu system
The first time you turn on your converter box, the
Install Guide opens, where you can set basic
options. For more information, see “Setting basic
options” on page 4.
Your converter box has an on-screen menu
system that you can use to adjust options such
as picture and sound.
To use the on-screen menu system:
1 Press MENU . The menu system opens.
2 Press
or
to select a menu, then press
or to go to the options for the menu you
selected.
3 Press
or
to select an option, then press
to go to the next level of options.
4 Press
or
to adjust the option, then press
to confirm your setting.
5 Press EXIT to close the menu system.
SETUP menu
OPTION menu
Menu option Description
Auto Tuning Automatically finds all digital channels available
through the
From Antenna jack. For more
information, see “Searching for channels” on
page 6.
EZ Add Automatically adds new channels available
through the
From Antenna jack. Select this
option, then press . Your converter box
searches for new channels and adds them to the
memorized channel list.
Channel Edit Manually adds or deletes channels from the
channel list or the Favorites list. For more
information, see “Editing the memorized channel
list” on page 6 or “Creating a Favorites list” on
page 6.
Manual Tuning Manually adds. For more information, see
“Editing the memorized channel list” on page 6.
Output Channel Selects the channel (3 or 4) for the signal from
the
To TV (RF) jack. Your TV must be tuned to the
same channel to display the TV image. For more
information, see “Setting the output channel” on
page 5.
Menu option Description
Clock Sets the time. Normally, the clock is set using
signals transmitted by digital TV (DTV) stations.
When you select a time zone, the clock is set
automatically.
Note: If the DTV station does not send a time
signal or sends the wrong time signal, the clock
may be set to an incorrect time.
For more information, see “Controlling closed
captions” on page 10.
TV Aspect Ratio Selects your TV type. Select 4:3 if your TV has a
standard screen. Select 16:9 if your TV has a
wide screen. For more information, see
“Selecting the TV type” on page 8.