QUICK SETUP GUIDE
Full HD Dual Camera
Dash Cam
NS-DCDCHH2
FIND YOUR
USER GUIDE
ONLINE!
Go to www.insigniaproducts.com, enter your model in
the search box, then press
ENTER
. Next to
Features
,
click
Support & Downloads
, then next to
User Guide
,
click the language you want.
Before using your new product, please read these instructions to prevent any damage.
PACKAGE CONTENTS
• Dual Camera Dash Cam
• USB cable
• Vehicle power adapter
FEATURES
• 1080p resolution on front and rear-facing cameras
• G-force sensor automatically starts recording on impact
• Built-in microphone to capture audio
• Loop recording overwrites the oldest footage and prevents
you from running out of storage
Refer to the online
User Guide
for more button information.
INSTALLING YOUR DASH CAM
Note
: Use a card with 8 GB to 256 GB of memory. We recommend using a card
with the highest memory capacity available. Higher memory capacity lets
you record more.
1
Insert a microSD memory card (8 GB to 256 GB memory capacity).
2
Clean and thoroughly dry the windshield area where you want to
mount your dash cam.
3
Insert and slide the mounting bracket on the suction cap into the
mounting slot on the top of your dash cam.
4
Peel the protective film from the mounting bracket and the dash
cam lens.
5
Position the suction cup on the windshield, then move the
mounting bracket switch clockwise until you hear a click.
6
Connect the provided USB cable to the USB jack on your dash cam,
then thread the cable from your dash cam, around the outer edge
of the windshield, and to a 12V vehicle power socket.
7
Plug the cable into the vehicle power adapter, then plug the
adapter into the power socket and turn on your vehicle. Your dash
cam starts automatically.
Note:
The first time you insert a new SD card into your dash cam, the
screen will prompt you with one of the following error messages if there is
an issue with the card:
• CARD ERROR Replace SD Card
- indicates that the new card is not
available to your dash cam (the card may be incompatible or
damaged). Remove the SD card and replace it with another. Only SD
cards between 8 and 256 GB should be used.
OR
• CARD ERROR FORMAT Card in Camera
- indicates that the formatting
on the new card is not compatible with your dash cam. Use the Format
tool to format the card. This will delete all of the information on your
dash cam, so please save your files first.
8
Rotate the mounting bracket to adjust the viewing angle as
needed.
See your online
User Guide
for information about dash cam settings.
TURNING ON YOUR DASH CAM MANUALLY
1
Press and hold the power button to turn on your dash cam.
2
Press and hold the power button to turn off your dash cam.
Note:
If you have an SD card installed and if your dash cam is connected to
a vehicle power socket, it starts recording automatically when you start
your vehicle. You should review your first video to make sure that the
camera is positioned correctly and that the video recorded correctly.
RECORDING VIDEO WITH YOUR DASH CAM
1
Make sure that your dash cam is turned on.
2
Press the
OK
button to begin recording.
3
Press the
OK
button again to stop recording.
TROUBLESHOOTING & SPECIFICATIONS
For troubleshooting and specifications information see your
online
User Guide
.
IMPORTANT SAFETY INSTRUCTIONS
• Always read the safety instructions and the User Guide carefully. Keep the User Guide for future
reference.
• Do not drop or allow forceful impacts to your dash cam, or install it in locations exposed to heavy
vibrations.
• Do not disassemble or modify your dash cam in any way. Disassembly or modification may not only
void the warranty, but may also cause damage.
• Do not use or store your dash cam in damp locations. Liquid entering your dash cam may cause
damage or lead to fires or electric shock.
• Do not operate your dash cam in extreme heat conditions. If your vehicle is parked in a hot sunny
climate, let your vehicle cool down before using your dash cam
.
LEGAL NOTICES
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
CAN ICES-3(B)/NMB-3(B)
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2020 Best Buy. All rights reserved.
Front
Power button
Up button
Down button
OK button
Front lens
Speaker
Back
Screen
Indicator LED
Back lens
Microphone
• Suction mount
•
Quick Setup Guide
V2 ENGLISH 20-0331
MicroSD card
