Quick Setup Guide
NS
‐
CSPBTCUBE
‐
W
Bluetooth Cube Speaker
with Speakerphone
PACKAGE CONTENTS
• Bluetooth
speaker
• Keychain
strap
•
Quick Setup Guide
FEATURES
• Bluetooth streams music wirelessly
• Rechargeable battery lasts for up to two hours
• Use as a speakerphone for hands-free talking
• Take pictures remotely using the Power/pairing button
Top view
Back view
Charge indicator
Bluetooth indicator
Power/pairing button
Microphone
CHARGING YOUR SPEAKER
1
Connect the small end of a charging cable (not included) to
the micro USB port underneath the cover on your speaker.
2
Connect the other end to a USB charging port.
Note
: When the battery is low, you will hear beeps. About 10 minutes later,
the speaker will power off automatically.
Before using your new product, please read these instructions to prevent any damage.
TURNING YOUR SPEAKER ON AND OFF
Press and hold the Power/pairing button for three seconds to
turn your speaker on or off. The Bluetooth indicator blinks
quickly and the speaker enters pairing mode.
CONNECTING WITH BLUETOOTH
1
Make sure that your Bluetooth device is turned on and
within 33 feet (10 meters) of your speaker.
2
On your speaker, press and hold the Power/pairing button
for one second (or until hear a tone). Your speaker enters
pairing mode and the Bluetooth LED blinks.
Note
: Press and hold the Power/pairing button for one second to
return to pairing mode.
3
Turn on your Bluetooth device and turn on Bluetooth.
Set your device to pairing mode, then select
NS-CSPBTCUBE
. See the instructions that came with your
Bluetooth device for information about pairing.
4
If you are asked for a password, enter
0000
. When pairing
is complete, the Bluetooth indicator on your speaker lights
solid blue.
CHARGE INDICATOR LED
Solid red
Off
DESCRIPTION
Charging
Fully charged
BLUETOOTH INDICATOR LED
Blinks blue rapidly
Solid blue
DESCRIPTION
Speaker is in pairing mode
Speaker is paired
5
To disconnect from the paired Bluetooth device, press and
hold the Power/pairing button on your speaker for one
second. Your speaker disconnects from the Bluetooth
device and enters pairing mode again.
RECONNECTING TO A PAIRED DEVICE
When your speaker is not paired to a device, the Bluetooth
indicator blinks blue.
Note
: If a device does not automatically reconnect, you may need to
reselect
NS-CSPBTCUBE
on your Bluetooth device.
Micro USB
charging port
Keychain strap
hole
LISTENING TO MUSIC
1
Press and hold the Power/pairing button, then connect to
your Bluetooth device.
2
Begin playback on your Bluetooth device.
3
Adjust the volume on your Bluetooth device.
Note
: Use the controls on your Bluetooth device to control playback.
TAKING A CALL
1
Press the Power/pairing button briefly to accept an
incoming call.
OR
Press and hold the Power/pairing button to reject an
incoming call.
2
Press the Power/pairing button during a call to end the call.
TAKING PICTURES
1
Connect your smartphone to the speaker using Bluetooth.
2
Start your phone’s camera.
3
Quickly press the Power/pairing button on your speaker to
take pictures.
Your speaker loses the Bluetooth
connection if you...
Turn off your speaker.
Move the Bluetooth device out of
range.
Turn off your Bluetooth device.
Turn off Bluetooth on your Bluetooth
device.
Connect your Bluetooth device to
another Bluetooth device.
To reconnect...
Turn on your speaker. Your speaker searches for the last
connected Bluetooth device and reconnects.
Make sure that your Bluetooth device is within 33 feet of
your speaker.
Turn on your Bluetooth device, then make sure that
Bluetooth is on.
Turn on Bluetooth on your Bluetooth device.
Disconnect your Bluetooth device from the other
Bluetooth device, then set your device to pairing mode.
Select
NS-CSPBTCUBE
on your Bluetooth device.
