5
Multi-Format Memory Card Reader
www.insigniaproducts.com
Using your card reader
To access a memory card using Windows:
1
Plug one end of the USB cable into the card reader, then plug the other
end of the USB cable into an available USB port on a computer. Your
computer installs the drivers automatically and a removable disk drive
appears in the My Computer/Computer (Windows Vista) window.
2
Insert a card into the appropriate slot, as shown in the table on page 4.
The blue data LED lights.
3
Click
Start
, then click
My Computer/Computer
. Double-click the
appropriate drive to access the data on the memory card.
4
To access files and folders on the memory card, use normal Windows
procedures for opening, copying, pasting, or deleting files and folders.
To remove a memory card using Windows:
microSD
Insert microSDHC or microSD cards into this slot. No
adapter is required.
M2
Insert M2 cards into this slot.
CF (Types I
and II)
Insert Compact Flash™ (CF) type I/II, UDMA card into this
slot.
Caution
• This card reader does not support multiple cards at the
same time. You must insert only one card at a time into
the card reader. To copy files between cards, you must
first transfer the files to a PC, then change cards and
move the files to the new card.
• Cards must be inserted into the correct slot label side up,
otherwise you may damage the card and/or the slot,
except for the SD slot, which requires that cards be
inserted label side DOWN.
Caution
Do not insert or remove memory cards while the blue data LED
on the reader is flashing. Doing so may cause damage to your
card or loss of data.
Media
Card Slot
Card Image
Details
NS-CR25A2_NS-CR25A2-C_16-0400_MAN_V1_ENG.fm Page 5 Tuesday, August 16, 2016 8:04 AM
