7
4.5 Cu. Ft. Retro Compact Refrigerator
www.insigniaproducts.com
Refrigerator parts
Installing your refrigerator
Before installing your refrigerator
• Remove the exterior and interior packing.
• Let your refrigerator stand upright for approximately four hours before
connecting it to power. This reduces the possibility of a malfunction in the
cooling system from incorrect handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
Finding a suitable location
• Place your refrigerator on a floor that’s strong enough to support your
refrigerator when it is fully loaded.
• Allow 5 in. (12.7 cm) of space between the back and sides of your refrigerator
and any surrounding walls. This allows correct air ventilation. Adjust the foot
to keep your refrigerator level.
CAUTION
: Your refrigerator is not designed for a recessed installation.
Shelf
Temperature
control and
interior light
Freezer door
Refrigerator
door
Crisper with
glass cover
Leveling foot
Freezer
compartment
Top hinge cover
“Dispense-A-Can
storage
