12
www.insigniaproducts.com
12
Align the hinge with the screw holes on the door and the hole in the top edge
of the door. Slide the pin through the hole in the hinge and into the hole on
the top edge of the door. Use the screws to attach the hinge to your
refrigerator, but don’t tighten the hinge screws.
13
Place the hole covers over the hinge openings on the other side of the door.
14
Make sure that the door seals are snug on all sides when the door is closed,
then tighten the upper hinge screws.
15
Place the hinge cover over the upper hinge, then secure the cover with the
screw you removed previously.
16
Adjust the leveling feet to level your refrigerator.
Leveling your refrigerator
• Your refrigerator must be level in order to function correctly. If your
refrigerator isn’t leveled during installation, the doors may not close or seal
correctly and cause cooling, frost, or moisture problems.
• To level your refrigerator, turn the leveling foot clockwise to raise a side to your
refrigerator or turn it counter-clockwise to lower a side.
Note
: Having someone push against the top of your refrigerator helps to take some
weight off the leveling foot and makes it easier to adjust.
