PACKAGE CONTENTS
• Charging case (with mobile battery pack)
• Micro USB cable (attached to the case)
•
Quick Setup Guide
SAFETY INFORMATION
• Do not expose your mobile battery pack to heat, fire, or
water.
• Do not modify, disassemble, open, drop, crush,
puncture, or shred the mobile battery.
• This is not a toy. Young children should be supervised to
make sure that they do not play with the mobile battery.
• Do not use the mobile battery while charging is in
progress.
• Recharge the mobile battery before use if it has not
been used for more than 90 days.
• Risk of fire and burns. Do not open, crush, heat above
140°F (60°C), or incinerate. Follow the manufacturer’s
instructions.
This product is safe for regular use under normal
conditions. As with any device using electrical power,
some situations may be unsafe and injuries or damages
could result. To minimize or avoid unsafe conditions,
please read and follow the instructions before using.
CHARGING THE MOBILE BATTERY
PACK
Fully charge your mobile battery pack before
using it for the first time.
1
Plug the small end of a Micro USB charging cable
(not included) into the mobile battery’s IN port.
2
Plug the large end of the cable into a USB port on
your computer, car charger, or wall charger (not
included). The mobile battery begins charging
and the LED indicator lights red.
Notes:
• The LED turns blue when charging is complete.
• The LED blinks red when the mobile battery pack’s
battery is low.
Before using your new product, please read these instructions to prevent any damage.
Quick Setup Guide
|
NS-CAHCC02
Charging Case for Bluetooth Earbuds
CHARGING YOUR BLUETOOTH
EARBUDS
1
Plug the built-in Micro USB connector inside the
case into your earbuds (not included).
Your earbuds begin charging.
2
Put the earbuds in the case.
Notes:
• If your earbuds use a charging cable other than a
micro USB, you will need an adapter.
• The LED turns off once your earbuds are fully charged.
Earbuds
(not included)
Mobile battery pack
LED indicator
(not included)
