Quick Setup Guide |
NS-CAHBT02-BL/NS-CAHBT02-BK
Bluetooth Over-the-Ear Headphone
PACKAGE CONTENTS
• Bluetooth over-the-ear headphone
• USB charging cable
•
Foam ear pads
•
Quick Setup Guide
FEATURES
• Sweatproof earpads for sports use
• Comfortable foam earpads included
• Reflective
headband
• Volume
control
• Listen to music and talk on the phone
wirelessly. Music playback:
10 hours
• Echo cancellation and noise suppression
• Voice prompts and easy pairing
• High
quality
sound
Before using your new product, please read
these instructions to prevent any damage.
USING YOUR STEREO
HEADPHONES
Turning your stereo headphones on and off
1
Place the headphones around your neck.
2
Press and hold the button for three seconds.
The LED blinks blue (when turned on) or red
(when turned off ) and the voice prompt says
“Power on”, or “Power off.”
Final flat size: 419.1 × 139.7 mm
Final fold size: 69.85 × 139.7 mm
FIND YOUR
USER GUIDE
ONLINE!
Go to www.insigniaproducts.com, then
click
Support & Service
.
Enter
NS-CAHBT02
in the box under
Manual, Firmware, Drivers & Product
Information
, then click
►
.
# DESCRIPTION
1
+/- Volume Up
Volume
Down
2
Reflective
strip
3
Indicator
LED
4
(Power/Talk/
Play/Pause/
Pairing)
button
5
Microphone
6
/
Next
Track
Previous
Track
7
Micro USB port
FUNCTION
Press + to increase the volume.
Press - to decrease the volume.
Provides extra safety in low-light
conditions.
Shows current status of the headphones.
Press to turn on your stereo
headphones. If you receive a phone
call, press to talk.
Allows you to talk on the telephone.
Press to skip to the next
track/fast forward.
Press to skip to the previous
track/fast rewind.
Plug the micro USB connector into
this port to charge your headphones.
CHARGING YOUR STEREO
HEADPHONES
•
When the red indicator LED blinks three times a
second, the battery is low
. To charge the battery,
plug the microUSB charging cable into your
computer and into the microUSB port on your
headphones. The red LED turns on to indicate
that the battery is charging and turns off when
fully charged.
BLUETOOTH BASIC INDICATION
Bluetooth function indication
PAIRING YOUR STEREO
HEADPHONES
Notes:
•
Range is 33 feet (10 meters)
•
Supports easy pairing
•
Prompts you by saying “
Device Connected
,” when
connected
•
Supports a battery indicator icon on an iOS device
Pairing with a cell phone or MP3 player
1
With your stereo headphones turned off,
press and hold for four seconds. The blue
and red LEDs blink alternately.
2
On your phone or MP3 player, select
INSIGNIA NS-CAHBT02
from the list of
discovered devices, then enter the password
0000
(four zeros) (if required) to pair your
headphones.
For more information on pairing Bluetooth
devices to your cell phone or MP3 player, see
the device’s documentation.
Note
: After the headphones have been successfully
paired with the cell phone or MP3 player, the
headphones will automatically reconnect to the
phone or MP3 player.
ACTION
Power on
Power off
Pairing mode
Play/Pause
Volume Up/Down
Next Track/Previous Track
Fast Forward/Fast Rewind
Incoming call
Answer call
Reject call
Redial
Reset device list
OPERATION
Press and hold more than two seconds
Press and hold more than three seconds
Press and hold more than four seconds in
power off mode
Press and release button
Press and release
+
/
-
button
Press and release / button
Press and hold
/ button
Press and release when a call is incoming
Press and hold when a call is incoming
Double press
Long press button more than
10 seconds in power off mode
LED INDICATION
Blue LED lights for 1.5 seconds
Red LED lights for 1.5 seconds
Blue and red LED blinking
alternately
Blue LED blinks three times every
five seconds when a call is received
All LEDs turn off
SOUND
“power on”
“power off”
Two short beeps
Two high beeps for maximum
volume
. Two low beeps for
minimum volume
Ring tone
One short beep
One long beep
Two short beeps
