background image

20

NS-BTST21

www.insigniaproducts.com

Legal notices

FCC Part 15

This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the 

following two conditions: (1) this device may not cause harmful interference, and (2) this 

device must accept any interference received, including interference that may cause 

undesired operation.
This equipment has been tested and found to comply within the limits for a class B digital 

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential installation. This equipment 

generates, uses, and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular installation. If 

this equipment does cause harmful interference to radio or television reception, which can 

be determined by turning the equipment off and on, the user is encouraged to try to correct 

the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

Consult the dealer or an experienced technician for help.

FCC warning

Changes or modifications not expressly approved by the party responsible for compliance 

with the FCC Rules could void the user’s authority to operate this equipment.

Deleted Canadian statement.

FCC RF Radiation Exposure Statement Caution: This equipment complies with FCC radiation exposure 

limits set forth for an uncontrolled environment.

Summary of Contents for NS-BTST21
























Reviews: