16
NS-BTST21
www.insigniaproducts.com
3
Push new stylus upwards until the tip locks into place.
Adjusting the anti-skating control
Anti-skating applies a small outward force to the tone arm, counteracting the
tendency of the tone arm to move inward toward the center of the record. When
you initially set up your turntable, set the anti-skate adjustment control knob to
the same setting as the tracking force dial.
Refer to the specification for the needle
pressure value in the instructions.
In case of substantial use of back-cueing, scratching, or reverse-direction
operation, you may prefer to use less, or no, anti-skate compensation.
Where is the specification for the needle pressure value? Which instructions?
CAUTIONS:
• Do not remove or bend the stylus.
• Do not touch the needle to avoid injury your hand.
• Keep out of reach of children.
Notes:
• When you adjust the
Anti-Skating
knob, leave the tone arm and balance
weight alone to prevent damaging the stylus.
• If a record can’t playback entire tracks, we recommend you reset the
anti-skating control to
0
(zero).
0
0.
5
1
2.5
Anti-skating control
