10
NS-BTST21
www.insigniaproducts.com
Side view
7
Tone arm lifter
Push forward and back to raise and lower tone arm.
8
Tone arm rest
holder
Place the tone arm on this holder with it is not in use.
9
Tone arm
Holds the stylus that produces sound from the record.
10
RPM selector
switch
Turn to select the record type (
33
or
45
) or
OFF
to turn
off your turntable.
(The default
OFF
.)
11
Bluetooth
pairing button
Press and hold for two seconds to start Bluetooth pairing.
When pairing is turned on, press to start searching for
your Bluetooth speakers or headphones. The Bluetooth
indicator blinks red and blue until a link is made. After
you connect to a Bluetooth speaker, your turntable
automatically reconnects to the speaker each time you
turn on your turntable and set it to 33 or 45 RPM.
12
Status
indicator
Displays status.
• Solid red indicates the is power on and Bluetooth is
in standby.
• Solid blue indicates Bluetooth is connected.
• Blinking red and blue indicates Bluetooth is in pairing
mode.
• Blinking blue indicates Bluetooth is disconnected or
connecting to the last device.
#
ITEM
DESCRIPTION
1
L/R AUDIO out
jacks
Plug the included RCA audio cable into these jacks. Match red to
red and white to white.
2
Phono/Line
switch
Toggle to the left to select
PHONO IN
or toggle to the right to
select
LINE IN
.
Your turntable has a built-in PHONO equalizer function. You can
use your turntable even if you don't have a PHONO amplifier or
connectible equipment with a built-in PHONO amplifier.
3
AC power jack
Plug the AC power cord into this jack and into a power outlet.
#
ITEM
DESCRIPTION