22
NS-49DR420NA18
www.insigniaproducts.com
Coaxial (good)
1
Make sure that your TV’s power cord is unplugged and all connected devices are turned off.
2
Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3
Connect a coaxial cable (not provided) to the
ANT/CABLE IN
jack on the side of your TV and to the coaxial out jack
on the cable or satellite box.
4
Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5
On the
Home
screen, press or to highlight the
Antenna TV
tile, then press
OK
. If you have not set up the
TV tuner, follow the on-screen instructions.
Notes
• Use a coaxial cable to eliminate interference and noise from radio
waves.
• Do not bundle the coaxial cable with the power cord or other cables.
Cable or
satellite box
Coaxial cable
Side of TV
Coaxial cable
connector
ANT/CABLE IN
jack
On your TV
Cable
wall jack
