15
NS-40D510MX15 Insignia 40" LED TV
www.insigniaproducts.com
Component video (better)
1
Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2
Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3
Connect a component video cable (not provided) to the
Y/VIDEO
,
P
B
, and
P
R
jacks on the back of your TV and
the component video out jacks on the cable or satellite box.
4
Connect an audio cable (not provided) to the
L
and
R
audio jacks
on the back of your TV and to the audio out
jacks on the cable or satellite TV box.
5
Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
6
Press
INPUT
to open the
INPUT SOURCE
list.
7
Press
S
or
T
to highlight
Component
, then press
ENTER
.
Note
Cables are often color-coded to match color-coded jacks.
Notes
• The
Y/VIDEO
,
P
B
, and
P
R
video jacks (used to connect a component
device) share the
L
and
R
audio jacks with the
Y/VIDEO
jack (used to
connect an AV (composite video) device).
• When you connect the audio using the
L
and
R
audio jacks, the audio
output is analog.
Audio cable
Cable or
satellite box
Component video
cable
Back of TV
Component
video cable
connectors
Audio cable
connectors
Analog
audio jacks
Component
video jacks
On your TV
