42
NS-39L400NA14 Insignia 39" LCD TV
www.insigniaproducts.com
Changing channel settings
Automatically scanning for channels
When you scan for channels, your TV searches for
channels with signals and stores the channel
information in the channel list. When you press
CH
or
CH
, your TV goes to the next or
previous channel in the channel list.
If the TV signal source changes, for example you
change from an outdoor antenna to cable TV (no
box), you need to scan for channels.
To automatically scan for channels:
1
Press
MENU
. The on-screen menu opens.
2
Press
W
or
X
to highlight
CHANNELS
, then press
T
or
ENTER
. The
CHANNELS
menu opens.
3
Press
S
or
T
to highlight
Auto Channel Search
,
then press
ENTER
. The
CHANNELS · AUTO
CHANNEL SEARCH
screen opens.
4
Press
S
or
T
to highlight
Antenna
,
Cable
, or
Satellite Box
, then press
ENTER
.
A
If you select
Antenna
, your TV scans for
available channels. The scan may take
several minutes.
Note
You can press
EXIT
to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.
