19
Insignia 39" LCD TV
www.insigniaproducts.com
Using composite video (good)
To connect a DVD or Blu-ray player using composite video:
1
Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2
Connect an AV cable (not provided) to the
COMPONENT IN/AV IN Y/VIDEO
jack and
L
and
R
AUDIO
jacks on
the back of your TV and to the
AV OUT
jacks on the DVD or Blu-ray player.
3
Plug your TV’s power cord into a power outlet, then turn on your TV.
4
Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
5
Press
INPUT
to open the
INPUT SOURCE
list.
6
Press
S
or
T
to select
Component/AV
, then press
ENTER
.
Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green
COMPONENT IN/AV IN Y/VIDEO
jack.
Note
• The
COMPONENT IN/AV IN
Y/VIDEO
,
P
B
, and
P
R
video jacks (used to
connect a component device) share the
L
and
R
AUDIO
jacks with the
COMPONENT IN/AV IN Y/VIDEO
jack (used to connect a composite
device).
• When you connect the audio using the
L
and
R
AUDIO
jacks, the audio
output is analog.
AV cable
(composite video cable)
Back of TV
Composite
video cable
connector
Composite
video jack
Analog audio
cable
connectors
Analog
audio jacks
DVD or Blu-ray player
On your TV
