Insignia NS-39D310NA17, User Manual

Page: 68 / 80

68
NS-39D310NA17 / NS-50D510NA17 / NS-50D510MX17
www.insigniaproducts.com
Restoring settings to the defaults
When you restore default settings, all the settings you
have customized (except parental controls) are reset.
1 Press MENU .
2 Press
W
or
X
to highlight HELP , then press
T
or
ENTER .
3 Press
S
or
T
to highlight Reset to Default , then
press ENTER or
X
.
4 Press
S
or
T
to select OK (to reset) or Cancel (to
not reset), then press ENTER .
If you select OK , your TV turns off, then turns on
again. Go through the Easy Setup wizard. For more
information, see Turning on your TV for the first
time on page 34 .
OR
If you select Cancel or press MENU , your TV
returns to the Help menu without making any
changes.
OR
If you press EXIT , the on-screen menu closes
without making any changes.
Video and audio
Problem Solution
Picture does
not fill the
screen. There
are black bars
around the
picture.
• Change the aspect ratio. See the
Aspect Ratio option in Adjusting
the TV picture on page 46 .
No picture
(screen is not
lit) and no
sound.
• Press on the TV or the remote
control.
• Make sure that the Audio Only
option is set to Off . See Playing TV
audio only on page 50 .
• Make sure that the video cables are
connected
correctly and securely
to your TV.
• Adjust the contrast and brightness.
See Adjusting the TV picture on
page 46 .
• Make sure that the power adapter is
plugged into a working outlet.
• Press INPUT and make sure that the
correct video input source is
selected. See
Selecting the video
input source on page 37 .
• Try another channel. The station
may be experiencing problems.
• Make sure that the incoming signal
is compatible.
• Make sure that the antenna or cable
TV is connected correctly and
securely. See
Connecting a cable or
satellite box on page 17 or
Connecting an antenna or cable TV
(no box)
on page 20 .
• Check the closed caption settings.
Some TEXT modes can block the
screen. See
Using closed captioning
on page 59 .
Dark, poor, or
no picture
(screen is lit),
but sound is
good.
• Try another channel. The station
may be experiencing problems.
• Make sure that the antenna or cable
TV is connected correctly and
securely. See
Connecting a cable or
satellite box on page 17 or
Connecting an antenna or cable TV
(no box)
on page 20 .
• Adjust the brightness. See Adjusting
the TV picture on page 46 .
• Press PICTURE to change to a
different picture mode. See
Adjusting the TV picture on
page 46 .
• If you are using an antenna, the
digital channel signal may be low. To
check the digital channel signal
strength, see
Checking the digital
signal strength on page 54 .
• If you are using an antenna and the
signal strength is low, adjust the
antenna or use a highly directional
outdoor antenna or set-top antenna
with a built-in amplifier.
• Make sure that the video cables are
connected correctly and securely to
your TV.
• The video cable(s) you are using
may be bad. Try a new set.
Problem Solution