5
NS-32E320A13A
www.insigniaproducts.com
General
Specifications
Specifications are subject to change without notice.
Dimensions and weight
Screen
Display resolutions
Tuner
Inputs
Problem
Solution
No power
•
Make sure that the power cord is correctly
connected to your TV and a power outlet.
•
Unplug the power cord, wait 60 seconds, then
plug the cord back in and turn on your TV.
•
Other devices (for example, a surround sound
receiver, external speakers, fans, or hair dryers)
may be interfering with your TV. Try turning off
one device at a time to determine which device
is causing interference. After you have
determined which device is causing
interference, move it further from the TV to
eliminate the interference.
“No signal” error
message is displayed
•
Press
INPUT
and make sure that you have
selected the correct input for the device or
service you are trying to use.
•
If you are using a cable or satellite box, use the
remote that came with that box to change
channels.
•
Make sure that you have the correct input
selected to view channels from the cable or
satellite box.
After Auto Channel
Search, there are no
channels
•
Reception can vary by channel depending on the
broadcast power level of a given station. Contact
your cable or satellite TV provider.
•
Make sure that the antenna or cable/satellite TV
is connected securely to your TV.
•
Try replacing the cable between the
antenna/cable or cable/satellite box and
your TV.
One or more channels
do not display
•
Make sure that the channels are not blocked. See
“Setting parental control levels” in the online
User Guide
.
•
Make sure that the channels are not hidden. The
channel may have been deleted from the
channel list. You can tune to the channel by
pressing the number buttons or you can add the
channel back to the channel list. See “Hiding
channels” in the online
User Guide
.
•
If you are using a cable or satellite box, use the
remote that came with that box to change
channels.
•
Make sure that you have the correct input
selected to view channels from the cable or
satellite box.
•
If you are using an antenna, the digital channel
signal may be low. To check the digital channel
signal strength, see “Checking the digital signal
strength” in the online
User Guide
.
Password is lost
•
Enter
9999
to access parental controls, then set
a new password. See “Setting or changing the
password” in the online
User Guide
.
Some settings cannot be
accessed
•
If a setting is grayed, the setting is not available
in the current video input mode.
TV cabinet creaks
•
When the TV is in use, the temperature rises
naturally and may cause the cabinet to expand
or contract which can cause a creaking noise.
This is not a malfunction.
Control buttons do not
work
•
Make sure that the
Button Lock
option is set to
Off. See “Locking control buttons” in the online
User Guide
.
•
Unplug the power cord, wait a few seconds, then
plug the cord back in and turn on your TV.
TV keeps turning off
•
Make sure that the sleep timer is not turned on.
See “Setting the sleep timer” in the online
User
Guide
.
Notes
•
If the problem is not solved by using these
troubleshooting instructions, turn off your TV,
then turn it on again.
•
Additional troubleshooting information is in
your online
User Guide
. Go to
www.insigniaproducts.com, click
Support &
Service
, enter your model number in the
Product Search
field, then click
Search
.
Without stand
29.34 × 19.11 × 1.57 in.
(74.5 × 48.5 × 3.99 cm)
17 lbs. (7.73 kg)
With stand
29.34 × 21.04 × 7.28 in.
(74.5 × 53.45 × 18.5 cm)
18.4 lbs. (8.36 kg)
Screen size measured
diagonally
31.5 in.
Display type
LED
Panel 60 Hz vs.120 Hz
60Hz
Display resolution
720p
Panel resolution
1366 (H) × 768 (V)
Aspect ratio
16:9
Contrast ratio (typical)–panel
1200:1
Dynamic contrast ratio–
list value
9000:1
Brightness (center typical)
cd/m2
350 nits
Comb filter
3d y/c digital
Response time
8.5 ms
Horizontal viewing angle
176
Vertical viewing angle
176
HDMI
1080p, 1080i, 720p, 480p, 480i
Component video
1080i, 720p, 480p, 480i
Analog
NTSC
Digital
ATSC, 8-VSB, Clear-QAM
HDMI
3 (side)
E-EDID compliant
HDCP compliant
Component video
1 (back)
Composite video
1 (back)
Shared with Component Y
Shared audio (component
and composite)
Yes
S-Video
No
PC/VGA
1 (back)
3.5mm PC audio input
1 (side)
DVI
1 (side) (HDMI 1/DVI jack)
USB
1 (side)
Supports JPEG and firmware upgrade
NS-32E320A13A_12-0580_ IMP_INFO_V2_ENG.book Page 5 Monday, May 28, 2012 8:44 AM
