20
Insignia 32" 1080p 60Hz LED TV
www.insigniaproducts.com
AV (composite video) (good)
1
Make sure that your TV’s power adapter is unplugged and the DVD or Blu-ray player is turned off.
2
Connect an AV cable (not provided) to the green
VIDEO / Y
jack and
L
and
R
AUDIO
jacks on the back of your TV and
to the
AV OUT
jacks on the DVD or Blu-ray player.
3
Plug your TV’s power adapter into a power outlet, then turn on your TV.
4
Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
5
Press
INPUT
to open the
INPUT SOURCE
list.
6
Press
S
or
T
to highlight
Component/AV
, then press
ENTER
.
Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green
VIDEO / Y
jack.
Important
• The
VIDEO / Y
,
P
B
, and
P
R
video jacks (used to connect a component
device) share the
L
and
R
AUDIO
jacks with the
Y / VIDEO
jack (used to
connect an AV device). You can only connect one component video or
AV device at a time. We suggest upgrading to HDMI if your DVD or
Blu-ray player supports it.
• When you connect the audio using the
L
and
R
AUDIO
jacks, the audio
output is analog.
AV cable
Back of TV
AV cable
connector
AV jack
Audio cable
connectors
Analog
audio jacks
DVD or Blu-ray
player
On your TV
