Insignia NS-32D311MX17, User Manual, Page: 68 / 80

64
NS-32D311NA17 / NS-32D311MX17
www.insigniaproducts.com
Restoring settings to the defaults
When you restore default settings, all the settings you
have customized (except parental controls) are reset.
1 Press MENU .
2 Press
W
or
X
to highlight HELP , then press
T
or
ENTER .
3 Press
S
or
T
to highlight Reset to Default , then
press ENTER or
X
.
4 Press
S
or
T
to select OK (to reset) or Cancel (to
not reset), then press ENTER .
If you select OK , your TV turns off, then turns on
again. Go through the Easy Setup wizard. For more
information, see Turning on your TV for the first
time on page 30 .
OR
If you select Cancel or press MENU , your TV
returns to the Help menu without making any
changes.
OR
If you press EXIT , the on-screen menu closes
without making any changes.
Video and audio
Problem Solution
Picture does not
fill the screen.
There are black
bars around the
picture.
• Change the aspect ratio. See
the Aspect Ratio option in
Adjusting the TV picture on
page 42 .
No picture (screen
is not lit) and no
sound.
• Press on the TV or the
remote control.
• Make sure that the Audio Only
option is set to Off . See Playing
TV audio only on page 46 .
• Make sure that the video cables
are connected correctly and
securely to your TV.
• Adjust the contrast and
brightness. See Adjusting the
TV picture on page 42 .
• Make sure that the power cord
is plugged into a working
outlet.
• Press INPUT and make sure that
the correct video input source is
selected. See
Selecting the
video input source on page 33 .
• Try another channel. The station
may be experiencing problems.
• Make sure that the incoming
signal is compatible.
• Make sure that the antenna or
cable TV is connected correctly
and securely. See
Connecting a
cable or satellite box on
page 13 or Connecting an
antenna or cable TV (no box) on
page 16 .
• Check the closed caption
settings. Some TEXT modes can
block the screen. See
Using
closed captioning on page 55 .