15
32" 720p 60Hz LED TV
www.insigniaproducts.com
Coaxial (good)
1
Make sure that your TV’s power cord is unplugged and all connected devices are turned off.
2
Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3
Connect a coaxial cable (not provided) to the
ANT/CABLE IN
jack on your TV and to the coaxial out jack on the cable
or satellite box.
4
Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5
Press
INPUT
to open the
INPUT SOURCE
list.
6
Press
S
or
T
to highlight
TV
, then press
ENTER
.
7
If you cannot tune to channels you know exist, scan for channels. See
Automatically scanning for channels
on
page
Notes
• Use a coaxial cable to eliminate interference and noise from radio
waves.
• Do not bundle the coaxial cable with the power cord or other cables.
Cable or
satellite box
Coaxial cable
Side of TV
Coaxial cable
connector
ANT/CABLE IN
jack
On your TV
Cable wall
jack
