35
Insignia 24" LED TV
www.insigniaproducts.com
Turning on your TV for the
first time
The first time you turn on your TV, the Setup Wizard
opens. The Setup Wizard guides you through
setting up basic settings including the menu
language, time setting, picture mode, TV signal
source, and the channel list.
To set up your TV:
1
Make sure that you have:
• Installed the remote control batteries. (See
page
for details.)
• Connected an antenna, cable TV, or satellite
TV. (See page
through
for details.)
• Connected the power adapter. (See page
for details.)
2
Press (power) to turn on your TV. The
Choose
your Menu Language
screen opens.
3
Press
S
or
T
to highlight the language you
want, then press
ENTER
. The time setting screen
opens.
4
Press
S
or
T
to highlight
Mode
, then press
X
to
access the setting.
5
Press
S
or
T
to select
Manual
(to set the date
and time manually) or
Auto
(to set the date and
time automatically from a TV signal source
based on the time zone you select), then press
ENTER
,
MENU
, or
W
.
6
Press
S
or
T
to highlight
Time Zone
, then press
X
to access the setting.
7
Press
S
or
T
to select your time zone. You can
select
Eastern
,
Central
,
Mountain
,
Pacific
,
Alaska
,
Hawaii
,
Atlantic
, or
Newfoundland
,
then press
ENTER
,
MENU
, or
W
.
8
Press
S
or
T
to highlight
Daylight Savings
,
then press
X
to access the setting.
9
Press
S
or
T
to select
On
(if your viewing area
observes Daylight Savings Time) or
Off
(if your
viewing area does not observe Daylight Savings
Time), then press
ENTER
,
MENU
, or
W
.
10
If you selected
Manual
for
Mode
:
• Press
S
or
T
to highlight
Year
,
Month
, or
Date
, then press
X
to access the setting. Press
S
or
T
to adjust the setting, then press
ENTER
.
• Press
S
or
T
to highlight
Time
, then press
X
to
access the setting. Press
W
or
X
to highlight
the hour, minute, or AM/PM field, then press
S
or
T
to adjust the setting. When you are
finished, press
ENTER
.
11
When you have finished setting the time, press
ENTER
. The
What is your viewing environment
screen opens.
12
Press
S
or
T
to highlight
Home Use Mode
or
Store Display Mode
, then press
ENTER
.
If you selected
Store Display Mode
, the
message asks if you are sure you want this
mode. Select
Yes
to continue using
Store
Display Mode
, or select
No
to change your
selection, then press
ENTER
.
Store Display
Mode
is not an energy savings mode and will
display a retail banner.
The
Choose your TV Source
screen opens.
Note
If you select
Auto
, the displayed time will
be incorrect until your TV gets the correct
time from a TV signal source.
