Insignia NS-19E310NA15, User Manual

Page: 56 / 83

51
NS-19E310NA15 Insignia 19" 720p 60Hz LED TV
www.insigniaproducts.com
• Headphones/Audio Out —You can use the
AUDIO OUT/ jack on the side of your TV to
connect headphones, a home theater system,
sound bar, or external speaker system. When a
device is connected to the
AUDIO OUT/ jack,
the TV speakers are muted. You can select:
• Headphones/Audio Out Variable —Select
this option to use the remote control that
came with your TV to control the audio from
headphones, a home theater system, a sound
bar, or an external speaker system you
connected to the
AUDIO OUT/ jack.
• Audio Out Fixed —Select this option to use
the remote control that came with the home
theater system, sound bar, or external
speaker system you connected to the
AUDIO
OUT/ jack to control the audio.
• Reset Audio Settings —Reset all audio settings
to factory defaults.
4 Press
S T W
or
X
to adjust the option select a
setting, the press ENTER .
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Selecting the audio out mode
If your TV is on when you connect a device to the
AUDIO OUT/ jack on the side of your TV, a screen
opens where you select which audio out mode you
want to use.
1 Connect headphones, a home theater system,
sound bar, or external speaker system to the
AUDIO OUT/ jack on the side of your TV.
2 Press W or X to highlight the audio out mode you
want to use, then press ENTER . You can select:
• Headphones/Audio Out Variable —Select this
option to use the remote control that came with
your TV to control the audio from headphones, a
home theater system, or a sound bar you
connected to the
AUDIO OUT/ jack.
• Audio Out Fixed —Select this option to use the
remote control that came with the home theater
system, sound bar, or external speaker system
you connected to the
AUDIO OUT/ jack to
control the audio.
Playing TV audio only
You can turn off the picture on your TV and listen to
the program audio only.
1 Press MENU .
2 Press
W
or
X
to highlight CHANNELS , then press
T
or ENTER .
3 Press
S
or
T
to highlight Audio Only , then press
ENTER or
X
.
4 Press
S
or
T
to select On .
5 Press MENU , ENTER , or
W
to return to the previous
menu, or press EXIT to close the menu.
Notes
• The picture turns off in about five
seconds.
• Audio Only works only when the
input source is TV, and your TV is
receiving a broadcast signal.
• To exit audio only mode, press any
button. When you exit audio only
mode, the
Audio Only option is
automatically reset to Off .