background image

 

www.insigniarange.com

 

Last Modified: 08/10/2014

 

 05 

YOU WILL NEED

 

TOTAL ELECTRICAL REQUIREMENTS

 

Voltage Rating          220 

-

240AC

 

Frequency Rating     50HZ

 

Power Rating            3.0KW

 

 

Other than steam generator 

 

Internal Circuit Voltage is          12V

 

Internal Current Rating          0.17A

 

 

Your electrical contractor should understand 

ALL 

legal requirements of connection before undertaking any work or installation. 

 

UNDER NO CIRCUMSTANCES UNDERTAKE THIS YOURSELF!!!

    

 

 

Note for electrician. This product comes with 13 amp plug(s) fitted with an RCD unit. We leave it this way for you to connect this your own way due to continued additions 

to current regulations. As at October 2010 we offered two methods.

 

1) Connect within current laws and IP directives using plug and RCD provided with steam version or supply one for non steam version

 

2) (Preferred) Wire into isolated fused feed connecting directly to the house consumer/service box. Remove the fitted plug and ensure the Consumer unit has capabilities to 

replace RCD feature if RCD is removed.

  

Always use protection against electrical surge. Your shower should be treated the same as a home computer. A surge protector should eradicate the possibility of either 

the transformer or computer control  being burnt out. Please note earth is required and found on chassis of shower tray. A further earth is required from Steam Generator 

unit. Each earth must ground through power supply line.

 

Requirements

 

                              Scissors           Stanley Blade             Silicone Gun               Spirit Level          Tape Measure    Philips Screwdriver    Electric Drill 

 

Summary of Contents for GT8004a

























Reviews:

Related manuals for GT8004a