Insignia ES009, Installation Manual, Page: 26 / 33

www.insigniarange.com Last Modified 06/03/2019
26
Shower Valve
Device output may differ from the image. Please refer to your outer chrome faceplate
inside your Insignia shower as a reference point.
IF YOUR DIAL DOES NOT CORRESPOND TO THE APPROPRIATE DEVICE:
Turn on your water to the shower and note which output the water exits from then turn off
the water and swap over the relevant hose.
Alternatively remove the outer chrome knob by removing the chrome cap and loosening
the grub screw (please ensure not to unscrew fully as this will drop within the chrome
knob) this is found on the opposite side to the chrome pillar. Once you have succeeded in
loosening this you can now slide your faceplate to correspond to the device.
Cold Water In Hot Water In
Steam Out
Bath Connection
Hand Shower
Monsoon Shower
Body Jets
Shower Valve