www.insigniashowers.com
Last Modified 17/05/2021
21
The steam generator has 3 connections.
1.
Steam Outlet:
Connect the white insulated hose to the steam system within your shower as shown in
image
A.
Make sure these are fitted in the correct position as they are only attached for
transportation reasons only.
2.
Water Inlet:
When installing the water line for the steam generator, there are 2 options available:
•
Purchase Insignia
’
s WRAS approved braided hoses—different packs are available for different shower
types.
•
Install a static water line from the shower valve (middle feed) to the steam generator. Even with a static
water line, flexible hosing will still be required for the hot and cold water feeds. If you choose this option,
please ensure you purchase the correct hose pack from
3.
Drain
: Connect the grey rubber hose from the steam generators drain opening to the nozzle on the
shower waste as shown in image
B.
Secure in place with the use of the Jubilee clip (AMI01) found in
your screw pack Ensure you drill out the spigot to allow the steam generator water to drain in to the
waste.
Steam Generator Connections
(steam version only)
NOTE: MUST DRILL OUT
2
1
3
White Insulated Pipe
Steam Outlet
A
B
Steam
Generator
