INSIGHT 4K Dual LED Series Installation And Quick Start Manual Download

Page: 9 / 84

page 3

Digital Projection INSIGHT 4K Dual LED & Quad Series

Installation and Quick-Start Guide

CONNECTING THE POWER SUPPLY

Rev B June 2016

Connecting The Power Supply

When the projector is viewed from the back,

the

AC mains inlet

is located on the right hand side, toward

the rear.

Push the mains connector in firmly.

Notes

Use only the power cable

provided.

Ensure that the power outlet

includes a ground connection as

this equipment MUST be earthed.

Handle the power cable carefully

and avoid sharp bends. Do not

use a damaged power cable.

LAMP

SERIAL

ERROR IR WIRED REMOTE

OUT

IN OUT

3D SYNC

HDMI

DISPLAYPORT

OPTION

POWERHEALTH

A B

Summary of Contents for 4K Dual LED Series





















































































Search results

Summary of Contents for 4K Dual LED Series

Reviews:

Related manuals for 4K Dual LED Series

Brands by name

Popular brands

INSIGHT 4K Dual LED Series, Installation And Quick Start Manual

Search results

Summary of Contents for 4K Dual LED Series

Reviews:

Related manuals for 4K Dual LED Series

Brands by name

Popular brands