Inseego Wavemaker PRO FX2000e, User Manual

Page: 31 / 84

5G INDOOR CPE FX2000e USER GUIDE 31
Connected Devices Page
This page provides details about each device connected to the 5G Indoor CPE and allows you to edit
how device names appear in the UI. You can also block or unblock a device from Internet access.
Connected
This table lists all devices connected to the 5G Indoor CPE:
Connection:
An icon indicates the connection type for each device. (You can hover over the
icon to read the type of connection.)
Device:
The name of the connected device is usually the hostname set on the connected
device. In rare cases, the hostname may be unavailable.
Network: Indicates whether the device is connected to the primary or guest network, or
through Ethernet.
Block:
Select this box to disconnect a device and prevent it from reconnecting. Select
Save
Changes
. The device is removed from the
Connected
list and appears in the
Blocked
list
below.
NOTE:
This option is available for each device connected through Wi-Fi, but is not
available for your own device or devices connected via Ethernet.
To view details on a device or change the name of the device as it appears in this UI, click the
down
arrow on the right to expand the device row. The following information appears:
•
Name: To change how the device name appears in this UI, enter a different name. NOTE: This
only changes the device name in the UI in which it is changed.
• IPv4
: The IP address of the connected device.