2014/02
1.Safety
3
1.
Safety
1.1.
INSTRUCTION MANUAL
This manual contains information regarding the reception, installation, operation, assembly, disassembly and
maintenance of the HYGINOX SEN pump.
The information published in this instruction manual is based on updated data.
INOXPA reserves the right to modify this instruction manual without prior notice.
1.2.
INSTRUCTIONS FOR START-UP
This instruction manual contains essential and useful information for the correct handling and maintenance of your
pump.
Carefully read the instructions prior to starting the pump, familiarise yourself with the installation, operation and
correct use of the pump and strictly follow the instructions. These instructions must be kept in a safe location near the
installation area.
1.3.
SAFETY
Warning symbols
Danger for people in general
Danger of injury caused by rotating
equipment parts
Electrical hazard
Danger! Caustic or corrosive agents
Danger! Suspended loads
Danger to the correct operation of the
equipment
Mandatory to ensure safety at the workplace
Mandatory use of safety goggles
1.4.
GENERAL SAFETY INSTRUCTIONS
Read the instruction manual carefully before installing and starting the pump. If in doubt, please contact
INOXPA.
During the installation
The
Technical Specifications
in Chapter 8 shall always be observed.
Never start the pump before connecting it to the pipework.
Do not operate the pump if the pump cover is not fitted.
Check for correct specifications of the motor, especially if its working conditions create an explosion
hazard.
During the installation, all the electrical work must be carried out by authorised personnel.
