Inovytec Ventway Sparrow, User Manual, Page: 113 / 144

Ventway Sparrow User Manual
Page 113 of 144
MIL-STD-461G Department of defense interface standard:
Requirements for the control of electromagnetic
interference characteristics of subsystems and
equipment
MIL-STD-1275 Department of defense interface standard:
Characteristics of 28 volt DC input power to
utilization equipment in military vehicles
ASTM F2119 - 3
Tesla
Standard Test Method for Evaluation of MR Image
Artifacts from Passive Implants
19. CLEANING AND ROUTINE MAINTENANCE
Part Procedure Comments
Ventilator 1. Spray entire
surface with 70%
Alcohol
2. Do not wipe
device for 1 min.
3. Wipe device
with pharma wipes
70% alcohol
Do not allow liquid to
penetrate into the ven-
tilator.
Inspect for residual de-
bris.
Air Inlet Filter Replace every 300
hours (or 1 month)
of operation, or as
necessary.
Do not attempt to clean
or reuse the air inlet
filter.