background image

8/28/14 06536A_v9 © Inovonics, 2014 - www.inovonics.com

EN1221S-60N Waterproof Senior Living 
Pendant with Neck Lanyard and EN1221S-
60W Waterproof Senior Living Pendant 
with Wristband

Installation and Operation Manual

1 Overview

The Inovonics senior living pendant provides residents with the comfort that 
help is just a button press away, while providing the advanced functionality 
and reliability that caregivers depend on.

Note: 

For  UL 2560 installations, refer to the 

EN6080 Area Control 

Gateway Installation Instructions

 or the 

EN6040-T Network Coordinator 

with Transformer Installation Instructions

.

1.1 Inovonics Wireless Contact Information

If you have any problems with this procedure, contact Inovonics technical 
services:

• E-mail: [email protected].
• Phone: 1.800.782.2709, option 2.

1.2 Maximum Number of Repeaters for a UL 2560 
Installation

To achieve the 99.99% alarm message reliability required for UL 2560 
compliance, system installations must operate within the following limits for 
end device and repeater counts.

1.3  Senior Living Pendant Components

 Figure 1  

Senior living pendant components (EN1221S-60N shown)

1.4 What’s In The Carton

Individually-packaged products include the following items:

• One unattached lanyard for the EN1221S-60N; one attached 

wristband for the EN1221S-60W

• One CR2032 coin cell battery
• One battery door

Note: 

Bulk-packaged products are shipped with multiples of the above 

items.

2 Installation and Startup

2.1 Installation Notes

• These products are designed to be maintained by professional 

technicians.

• Products are intended for indoor use.
• All products should be manually tested weekly (see section 6, “Test 

the Transmitter”).

2.2 Battery Installation

Caution: 

If you are installing batteries in multiple devices, keep the 

batteries from coming into contact with each other to prevent discharge.

1.

Place the battery in the battery compartment, ensuring that the positive 
terminal (+) faces up.

2.

Seat the battery door over the battery so that the arrow on the battery 
door is lined up with the unlocked padlock icon.

 Figure 2  

Battery door in the unlocked position

For product and installation videos visit us at 
www.inovonics.com/video/en1221s or use the 
QR code below.

End Devices

Maximum 
Repeaters

150

397

250

386

350

375

500

360

1000

313

2000

238

3000

184

A

Activation button

B

Transmit and alarm clear 
LED

C

Low battery LED

D

Battery door

E

Attachment loop

B

C

A

D

E

Unlocked 
position

Summary of Contents for EN1221S-60N

Page 1: ...1221S 60N shown 1 4 What s In The Carton Individually packaged products include the following items One unattached lanyard for the EN1221S 60N one attached wristband for the EN1221S 60W One CR2032 coin cell battery One battery door Note Bulk packaged products are shipped with multiples of the above items 2 Installation and Startup 2 1 Installation Notes These products are designed to be maintained...

Page 2: ...r s neck size Pull both slide adustment tabs on the lanyard to reduce the length of the cord Pull both sides of the lanyard cord to increase the length of the cord Figure 5 Adjust the neck lanyard ACC682 Wristband The ACC682 wristband comes attached to the EN1221S 60W waterproof senior living pendant with wristband The wristband is a standard 16mm width allowing for easy replacement with the wrist...

Page 3: ...will vibrate indicating that an alarm has been sent 7 Clear the alarm sent when you activated the pendant per section 3 2 Clear an Alarm 6 Test the Transmitter The transmitter should be tested after registration and then weekly to ensure operation To test the transmitter 1 Press the activation button for at least one second and ensure the red transmit LED lights the vibration activates and the ala...

Page 4: ...does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to w...

Reviews: