Inovance HD380-5T0.7GB, User Manual

Page: 131 / 298

Function Code Table
MD380 User Manual
- 130 -
F unction
Code
Parameter Name Setting Range Default Property
A7-01
Selection of control mode of
the output terminals on the
control board
Unit's digit: FMR (FM used as
digital output)
0
★
0: Controlled by the AC drive
1: Controlled by the user
programmable card
Ten's digit: relay (T/A-T/B-T/C)
Same as unit's digit
Hundred's digit: DO1
Same as unit's digit
Thousand's digit FMR (FM used
as pulse output)
Same as unit's digit
Ten thousand's digit: AO1
Same as unit's digit
A7-02 AI/AO function selection of
the user programmable card
0: AI3 (voltage input), AO2
(voltage output)
1: AI3 (voltage input), AO2
(current output)
2: AI3 (current input), AO2
(voltage output)
3: AI3 (current input), AO2
(current output)
4: AI3 (PTC input), AO2 (voltage
output)
5: AI3 (PTC input), AO2 (current
output)
6: AI3 (PTC100 input), AO2
(voltage output)
7: AI3 (PTC100 input), AO2
(current output)
0
★
A7-03 F MP output 0.0%–100.0% 0.0%
☆
A7-04 AO1 output 0.0%–100.0% 0.0%
☆
A7-05 Digital output
Binary setting
Unit's digit: FMR
Ten's digit: Relay1
Hundred's digit: DO
1
☆
A7-06
F requency setting through
the user programmable card -100.00% to 100.00%
0.0%
☆
A7-07 Torque setting through the
user programmable card
-200.00% to 200.00% 0.0%
☆