Introduction
User Manual H12 / SCAMAX® 8x1 - Version 2019.12
1.
Introduction
This manual contains information about the correct handling of SCAMAX® document scanners, type
H12 . This type includes the models 801, 811 and 821.
Additional models and special editions with a different configuration are possible.
All models are identical in design. If a specific model is not explicitly mentioned in this manual, the
description covers all models alike. In order to exclude operating errors, before you start working with
the SCAMAX® scanner, the pertinent safety precautions in this manual are to be observed.
This manual only describes the operation of SCAMAX® H12 type scanners and the integrated software
interface. The operation of external scanning software and the scanning computers used with them
from other manufacturers can be found in the respective manuals.
1.1.
Safety instructions
The unit may only be connected to a grounded outlet.
Removing of housings using tools is
only
permitted for trained technicians and authorized experts.
Under normal conditions the removing of housings isn’t necessary.
Risk due to moving parts! Keep fingers and other body parts away.
1.2.
Specific Danger Spots
While running, moving or opening and closing the unit, specific danger spots can arise which are
partially marked with warning decals and described in the following chapters. All figures are based
on a unit with full expansion (
Dual Input Hopper and 2nd Output Hopper
), as certain danger spots are
only existing with those modules.
1.2.1.
Unmarked Danger Spots
1.2.1.1. Covers
The scanner may only be operated with closed covers (
see chapter
). Magnetic switches at
all relevant positions prevent from operation with opened covers. When reaching into the covered
area, a small risk of pinching and grazing remains, due to exposed parts of the transport mechanism.
WARNING
All paragraphs with
WARNING
indicate that injury to the operator may be possible in case of
non compliance.
CAUTION
All paragraphs with
CAUTION
point out that non-observance can cause damage to the device
under certain circumstances.
WARNING
As an non-observance of the subsequent described danger spots can result in substantial
injuries, unconditional attention should be paid to all related notes and handling instructions.
