MEASURE OF SUCCESS
USER INSTRUCTIONS
Programmable
2-wire Transmitter
for Thermocouple
The user instruction must be read prior to adjustment and/or installation.
All information subject to change without notice.
© INOR 10/2021 - 4008975501 - MA APAQ C130 TC R01 en
GENERAL INFORMATION
APAQ C130
TC
is a low cost, non-isolated, easy-to-use
2-wire transmitter
, for
thermocouple input,
intended to be used in industrial environment.
The transmitter is configured from a mobile device via
NFC
c
ommunication, by using the app INOR Connect. Inor Connect is
available
for free download on App Store, Google Play Store and Huawei AppGallery.
C130
TC
MEASURE OF SUCCESS
DATA (short form)
CONFIGURATION
Input
2-wire connection
TC type B - Pt30Rh-Pt6Rh (IEC 60584)
0...+1820 °C
/
+32...
+
3308 °
F
TC type E - NiCr-CuNi (IEC 60584)
-270…+1000 °C / -454...+1832 °F
Input impedance
10 MΩ
Maximum wire loop resistance
Output
Internal or fixed
Sensor failure indication
Upscale (≥21.0 mA) or downscale (≤3.6 mA)
NAMUR Compliance
Current limitations and failure currents acc.
Adjustable filtering
l
evel
Ambient temperature
Storage and operation
-40 to +85 °C / -40 to +185 °F
Galvanic isolation
None
Power supply
6 to 32 VDC
Accuracy
Mounting
DIN B-head or larger
Configuration
App INOR Connect via
NFC™
Factory settings
Input
0 to 10
0
0 °C
Output
4 to 20 mA
Sensor error indication
Upscale
This product should not be mixed with other kind of scrap, after usage.
It should be handled as an electronic/electric device.
www.inor.com, www.inor.se
INOR Process AB
, PO Box 9125, SE-200 39 Malmö, Sweden,
Phone: +46 40 312 560, Fax: +46 40 312 570, E-mail: [email protected]
INOR Transmitter OY
, Unikkotie 13, FI-01300 Vantaa, Finland,
Phone:+358 10 421 7900, Fax: +358 10 421 7901, E-mail: [email protected]
INOR Transmitter GmbH
, Am See 24, D-47279 Duisburg, Germany,
Phone: +49-203 7382 762 0, Fax: +49-203 7382 762 2, E-mail: [email protected]
KROHNE Temperature Division INOR
, 55 Cherry Hill Drive,
Beverly, MA 01915, United States
Phone: +1 978 826 6900, Fax: +1 978 535 1720, E-mail: [email protected]
1.
TC type J - Fe-CuNi (IEC 60584
)
TC type K - NiCr-NiAl (IEC 60584)
TC type N - NiCrSi-NiSi (IEC 60584)
T
C type R - Pt13Rh-Pt (IEC 60584)
TC type S - Pt10Rh-Pt (IEC 60584)
TC type T - Cu-CuNi (IEC 60584)
-210…+1200 °C / -346...+2192 °F
-
270…+1300 °C / -454...+2372 °F
-
270…+1300 °C / -454...+2372 °F
-
50...+1750 °C / -58...+3182 °F
-50…+1750 °C / -58...+3182 °F
-270…+400 °C / -454...+752 °F
Cold Junction Compensation
In-head transmitter (TC sensor): 5 kΩ
4-20 mA, temperature linear
Warm-up time
After a max. 20 minutes the accuracy
specifications are reached
(due to the internal cold junction)
RoHS, China RoHS
Directive: 2011/65/EU and 2015/863/EU
Harmonized standard:
EN IEC 63000
China RoHS 2
TC type
R, S, T
TC type E
, J, K
TC type N
(-100...+1300
°C
)
Max. of
±1 °C or ±0.2% of span
Max. of
±1 °C or ±0.2% of span
TC type N
(-270...-100
°C
)
±2.0 °C / ±3.6 °F
2.
Launch the app by clicking on the App
icon or holding
your mobile device
against the transmitter on the part
of the
device where
NFC
is located
(only possible with
Android).
Click on “Read Configuration” and hold
your
mobile
devic
e
against the trans
mitter as
explained in the
first section.
a.
Sensor type
b.
Measuring rang
e
c.
Upscale or downscale
sensor
error indication
d.
F
ilter level
e.
TAG-number
f.
Password
3
.
4
.
Type K
TC type B
Max. of
±2.0 °C or ±0.2% of span
to NAMUR NE 43
0.4 to 26
sec.
See Data Sheet
Max. of
±3.6 °F or ±0.2% of span
Max. of
±1.8 °F or ±0.2% of span
Max. of
±1.8 °F or ±0.2% of span
Once you have set the desired values in the app, you transfer it to the
transmitter by clicking the transfer button and holding the mobile device
against the transmitter until a green check box appears confirming that
the transfer has been completed.
CJC accuracy
Typical
±1 °C
/
±
1.8
°F (max ±
3 °C
/
±5.4 °F
) within ambient temperature range
Before making a configuration of APAQ C130
TC
y
ou need to do
following:
Make sure that you have a mobile device with NFC
communication
activated.
Download the app INOR Connect to your mobile device.
Required versions:
iOS:
iOS 13 or later and
Android
:
Iphone 7 or later for NFC
Android 4.4
or later
Configuration procedure:
In the app you can edit the following:
