Searching
for lights…
Hue
PHILIPS
on
Connect your Innr Smart Button to Philips Hue
Step 1: Connect the Smart Button to the Philips Hue Bridge
Open the Philps Hue app and
start the searching for lights.
Remove the plastic tab to put the
Remote Control in pairing mode.
The LED on the front will start
blinking once per second.*
The LED will rapidly blink twice
to confirm it’s successfully
connected.
NOTE: the Smart Button will not
appear in the Philips Hue app.
*No blinking LED? Press and hold the reset button behind the battery lid for 3 seconds.
Step 2: Connect the Smart Button to the individual lights
Turn the light off for at least
5 seconds using the wall switch
and turn it on again. The light is in
pairing mode for 1 minute from now.
Press the Smart Button 3 times in
quick succession and hold the third
press for 3 seconds.
The LED on the Smart Button will
blink once per second.
Bring the Smart Button close to
the light (< 10cm).
The light will blink to confirm it’s
successfully connected.
You can now control the connected light(s) from the app and with the Smart Button.
Repeat Step 2 for all lights that you want to connect to the Smart Button.
Successful!
