Smart Coin System User Manual
Page
7
of
28
Copyright © Innovative Technology Ltd 2015
GA02033
The maximum thickness of the shelf (on to which the baseplate is mounted) is 10mm
– including any items which protrude below it (such as nuts, washers, screws etc.).
WARNING!
Ensure there is space for
coins to fall clear.
Ensure that there is space below the
exit chute
to
allow the coins to fall clear of the coin exit.
Secure the baseplate in position using the screw holes provided.
WARNING!
Ensure baseplate mounting
screws are flush with the
surface of the baseplate.
Do not allow screw heads to foul the SMART Coin
System.
3.3
Mounting the Smart Coin System
Slide the Smart Coin System on to the baseplate (reverse of removal).
WARNING!
Always ensure the bottom cash box exit on the underside of the SMART Hopper is clear
to allow coins to exit. Failure to do so can result in permanent damage to the internal
mechanisms
