User Manual
–
NV200 Spectral
Copyright © Innovative Technology Ltd 2019
Doc: User Manual NV200 Spectral
Version: 2.1
Page 51 of
95
6.5
ccTalk
®
6.5.1
General Description
ccTalk
®
is a serial communications protocol designed by Money Controls to allow 3-
wire interfacing between a host and cash handling peripherals.
Only the NV200 Spectral with standard cashbox and Spectral Payout module can
communicate via ccTalk. The TEBS cashbox and Ticket module are currently only
implemented in SSP.
Previously CC2 protocol was required to support a payout module, to implement the
extra commands used for note recycling. When programmed to ccTalk the NV200
Spectral recognizes when a payout module is connected and automatically supports
these extra commands, without needing to reprogram it to the CC2 protocol. For
legacy support, the protocol can be locked to CC2 if required.
Contact
Caution!
Innovative Technology Ltd. provides full
SDK packages including Interface
Specification, Implementation Guide as
well as source code examples for SSP and
eSSP only!
6.5.2
Pin Assignments
Pin
Name
Type
Description
1
TxD TTL
Output
Serial Data Out (Tx) (optionally link to Pin 5*)
5
RxD TTL
Input
Serial Data In (Rx) (optionally link to Pin 1*)
15
+ Vin
Power
+12/24VDC Supply
16
0V
Power
0V Supply (GND)
*
If true CCTalk communication is required
Caution!
+12VDC and 0V (GND) must
always be connected, also when
using USB connections.
