User Manual
–
NV200 Spectral
Copyright © Innovative Technology Ltd 2019
Doc: User Manual NV200 Spectral
Version: 2.1
Page 40 of
95
5
SOFTWARE INSTALLATION AND CONFIGURATION
5.1
Introduction
The NV200 Spectral leaves the factory programmed with the latest dataset and
firmware files, unless specifically requested. However, it is important to ensure your
device is kept up to date with the latest dataset and firmware. This section will give
you a brief overview of the various update possibilities with the NV200 Spectral. For
detailed instructions refer to the relevant manual package supplied with the software
or contact
5.2
Software Downloads
All software from Innovative Technology Ltd is free of charge and can be
downloaded from the website
www.innovative-technology.com/support/secure-
once registered and logged in. If you are not registered, create an account
via the Create an account form. A confirmation email will be sent to the registered
email address once all contact details have been successfully submitted.
5.3
Drivers
The ITL drivers allow you to connect any of our validators to a compatible Windows
device. If you are connecting via an IF17 then you will not need to follow this
process as they are signed Microsoft Drivers and should install automatically. If this
isn’t the case or yo
ur computer is disconnected from the network, there is a
standalone package included within the driver downloads.
5.4
Dataset/Firmware Programming
5.4.1
Validator Manager
5.4.1.1
General Description
Validator Manager is a utility which allows the user to reprogram any of IT
L’s
validators, hoppers as well as coin and note recycler. Note that admin rights are
required during installation. The validator must be in SSP for the Validator Manager
to detect the device.
5.4.1.2
System Requirements
.Net Framework 4.5
256mb ram
50mb hard disk free
Connected NV200 Spectral with active com port
Caution!
We have seen instances where one
of t
he dll’s (itdata1.dll) used in
Validator Manager are flagged as a
Trojan, this is a false positive and if
this happens you will need to add a
rule to your antivirus to allow the
file to run.
