NV9 Operations Manual GA326-4
36 of 38
© Copyright Innovative Technology Limited 2005
Appendix C - interface Tools DA1 - DA2
The DA1/2 Kits are designed for the following:
•
Connecting of ITL note validators to a PC to upgrade note data and firmware.
•
Testing of NV9 note validators independently of the host machine to confirm the validator is working
but the host machine may be inhibiting some of the channels.
The DA1 and DA2 Kit comprise of the following components:
DA1
DA2
DA1 adapter board (PA167)
DA2 adapter board
NV9 Adapter to Validator cable (C
USB type-A to Type-B cable
ITL Support CD-ROM for DA1
ITL Support CD-ROM for DA2
Power Cable
DA2 to NV9 cable
Installation Guide
Power Cable
Installation Guide
Connecting a DA1 to a validator and PC
If you are using Windows 95/98/NT/XP™
,
Pentium™ (© Microsoft and Intel) operating systems connect
the DA1 to the validator as shown below (see figure 1), using the 16-way to 5-way connector. The 3.5mm
jack plug and 2 banana plugs are used to supply power to the DA1. C12 volts to the red banana
plug and GND (0V) to the black plug.
Plug the 9-way D-type connector into the serial port of the PC and note of the number of the port, as this
will be needed later for configuring the software. Once the connections have been made install the
appropriate software for the validator you are using
.
Figure 1 - Connecting DA1 to a NV9 and PC for upgrading
Connecting a DA2 to a validator and PC
If you are using Windows Pentium™ (© Microsoft and Intel) 98, 98SE, 2000, XP Home or XP Professional
operating systems, connect the DA2 to the validator as shown below (see figure 2), using NV9 TO DA2
connector. The 3.5mm jack plug and 2 banana plugs are used to supply power to the DA2. C12
volts to the red banana plug and GND (0V) to the black plug.
Plug the USB type Connector into the USB port of the PC. Once the connections have been made install
the appropriate software for the validator you are using
.
Figure 2 - Connecting DA2 to a NV9 and PC for upgrading
Software Installation
To install the software to upgrade datasets and firmware, insert the CDROM into the PC drive. An
installation menu will appear, select the product that you wish to download, and select the software you
wish to use. Follow the onscreen instruction to complete the installation. Instructions for configuring and
using the software you have installed can by found in the online help for that software.
PC USB Port
Validator
+ 12V DC
Summary of Contents for GA326-3
Page 31: ...NV9 Operations Manual GA326 4 31 of 38 Copyright Innovative Technology Limited 2005...
Page 32: ...NV9 Operations Manual GA326 4 32 of 38 Copyright Innovative Technology Limited 2005...
Page 33: ...NV9 Operations Manual GA326 4 33 of 38 Copyright Innovative Technology Limited 2005...
Page 34: ...NV9 Operations Manual GA326 4 34 of 38 Copyright Innovative Technology Limited 2005...
