Modular Shelf
115-6933
Kit P/N:
Installation Instructions
Page 1: ...Modular Shelf 115 6933 Kit P N Installation Instructions ...
Page 2: ... 32 x 375 Truss Head Screws 8 8 32 Keps Nuts 2 8 32 x 312 Flat Head Screws Installation Instructions Detach Ball Bearing Slide Detach the outer part of the left and right ball bearing slides from the shelf by sliding the rail back and pulling the release tab The slide release is a white tab located along the inner rail Step 1 Attach Rear Rail Brackets Once the outer rails are release attach the le...
Page 3: ... 3 Attach the Rails to the Rack Attach the Front and Rear of the rails to the 4Post rack as shown below using supplied 4 12 24 Pan Head Screws and 4 12 24 Cage Nuts on each side Repeat for the other side Rear Rack Attachment 4Post Installation Instructions Page 3 ...
Page 4: ...e limited to repairing or replacing at our option any defective product 6933 Step 4 Attach the shelf to the slides Attach the Modular Shelf to the slides by interlocking the inner and mid rails on the left and right pushing the shelf into the rack Once locked in pull the blue tabs located on the inner rail to finish pushing the shelf into the rack Secure the shelf using the attached thumb screws ...
