3/8in.(10mm)
Socket Wrench
(Not lncluded)
ø5/32 in.(4 mm)
2 23/64 in.(60mm)
WARNING:
●Avoid potential personal injury or property damage! DO NOT over-tighten the
lag screws [A1]. Tighten the lag screws [A1] only until the they are pulled firmly
against the wall plate.
●Ensure the arm assembly/wall plate [01] is securely fastened
to the wall before continuing to the next step.
● Any material covering the wall must not exceed 5/8 in. (16 mm)
● Mount the arm assembly/wall plate directly onto the concrete surface
● Minimum solid concrete thickness: 203 mm (8 in.)
● Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)
● Never drill into the mortar between blocks
Wall
Anchor
A2
Step 2B Solid Concrete or Concrete Block Option
2A-3
2A-4
Install the arm assembly/wall plate [01].
using lag screws [A1]. Tighten the lag
screws [A1] only until they are pulled
firmly against the wall plate.
A1
01
Drill 3 pilot holes using a
5/32 in.(4mm)
diameter drill bit. Make sure the depth is
not less than
2 23/64 in.
(60mm).
UP
09
