manualshive.com logo in svg

Innovaphone IP1200, Administrator'S Manual, Page: 42 / 114

Share
Download
Innovaphone IP1200 Administrator'S Manual Download Page 42

page 42

innovaphone IP DECT

4.1.5  Configuration/DECT

DECT-specific settings of the IP1200 are made in this chapter.

4.1.5.1 Configuration/DECT/System

The general configuration of the DECT system, as well as the allocation of the 
DECT system name and password are performed in this submenu.

Name

The name of the DECT system. This name determines the 
name of the LDAP object in which the system parameters are 
stored. For a replication from an innovaphone PBX, a corre-
sponding object must be created in the PBX.

Pwd

The password for the encryption of all passwords in the LDAP 
database. If the user data from an innovaphone PBX is repli-
cated, the PBX password must be configured.

Sys-Mask

Without configuration of a Sys-Mask, the so-called 

connection 

handover

 is always used. With configuration of a Sys-Mask, 

the faster 

bearer handover

 between the DECT base station 

and the associated DECT repeater can be used.

AC

The access code that must be specified when logging on the 
DECT handset. This specification is only required if the value 

With user AC only

 

is selected in the 

Subscriptions

 list box.

Subscrip-
tions

The type of handset registrations (subscriptions).
•

With User AC only

: Subscriptions are allowed that have 

been configured in the user input screen with specifica-
tion of an IPEI number and with specification of an 
authentification code (

AC

). The specification of the AC is 

optional and can therefore be blank.

•

Allow Anonymous

: Anonymous subscriptions are allo-

wed. The handset logon always takes place with the 

AC

 

system. The 

AC

 entry field can be empty here too.

•

Disable

: Subscriptions are not possible.

Tones

Various tone schemas can be used here.

Enbloc 
Dialling

A checked check box enables enbloc dialling. This is only re-
quired if the gatekeeper or SIP provider does not support sin-
gle digit dialling.

Local R 
Key/Dis-
play Hand-
ling

The features of the R key are implemented in DECT systems 
on relevant VoIP protocols and should always be enabled in 
the innovaphone PBX.

Summary of Contents for IP1200



















































































































Reviews:

No comments