innovaphone® AG | Böblinger Straße 76 | 71065 Sindelfingen
Tel +49 7031 7 30 09-0 | Fax +49 70 31 7 30 09-99 | [email protected] | www.innovaphone.com
Errors and omissions excepted. All information, technical specifications and delivery times may be subject to change.
Original: ds_IP1060_en, issue: 07 / 2013, Copyright © 2000-2013 innovaphone® AG
innovaphone IP1060
Media gateway
for two ISDN PRI interfaces
Data sheet
Order number: 01-01060-001
Housing
Size: 210 x 184 x 32 mm
1 HE for 19” systems
Weight: 1050 g
Interfaces
2 x ISDN PRI: TE and NT mode for trunk
interface
1 x ISDN interface in TE and NT mode, for
routing, admin, synchronizing, backup or
other
2 x Ethernet: RJ 45 interface 10/100-BASE-TX
(auto negotiation), Power over Ethernet
(802.3af, Class 3)
Hardware
Power supply:
Power over Ethernet (802.3af, Class 3)
Power consumption: see wiki-article
„HowTo:Power Consumption“
Digital Signal Processor (DSP) for codec’s up
to 60 voice channels
512 MB SDRAM, 32 MB Flash
Operation temperature: 0 °C to +45 °C,
Humidity: 10% to 90%
(not condensed)
Storage temperature: -10 °C to +70 °C
Service
Conference server for up to 60 subscribers
VoIP protocols
H.323 Version 5
SIP Version 2, conform RFC 3261
SIP over UDP, TCP, TLS, SIPS
RTP, SRTP, RTCP
T.38 (Fax)
Voice Codecs
G.711 A-law / µ-law,
G.729AB,
VAD, CNG,
Dynamic Jitter Buffering
Echo Compensation: G.168
Network
•
PPPoE, manual or automatic connection
after boot
•
PPTP Tunneling up to 32 tunnels
simultaneously, encoding via MPPE
•
NAT, H.323-NAT
•
RSTP, IEEE 802.1x
•
VLAN-ID (DHCP and LLDP/MED support)
•
NTP support
ISDN
•
Routing VOIP-ISDN, ISDN-ISDN, VOIP-VOIP
•
Automatic dial tone European and US
Standard
•
ENUM for H.323 and SIP protocols
•
Protokolle EDSS1, QSIG, T1-CAS, E1-CAS
•
Plays recorded messages deposed on a web
server
Administration
Password protected administration via web-
browser, HTTPS, Kerberos Server
Log and trace files, Display of interface and
connection status, Ping – connection test for
Internet Protocol, Sending SNMP Traps
Save and reload config files, Boot code and
firmware update via HTML upload, Automatic
update via update server
