Innova Srl
Page 34
N420741A_manuale-HRC+2022 - rev.01 _EN
.docx
7.1.2
CLEANING THE HEAT EXCHANGER
i recommends checking the condition of the heat exchanger annually and
cleaning it if deemed appropriate. This operation must only be carried out by
qualified personnel (installer).
To clean the heat exchanger proceed as follows:
•
disconnect the unit from the power supply;
•
open the lower aesthetic covers i by removing the fixing screws
•
remove the lower panel by removing the additional fixing screws
•
remove the filters to access the condensate tray removal screws;
•
remove the clamp and disconnect the condensate drain;
•
remove the fixing screws of the condensate tray, and slide the
condensate tray and exchangers downwards;
Attention!
Never touch the fins of the exchanger, handle the exchanger keeping it only
on the closed sides.
View for exchanger extraction
