N420311A-Rev.03
EN
METAL CASE KIT AND AESTHETIC PANEL KIT FOR BUILT-IN
INSTALLATION
Warnings
This instruction is an integral part of the booklet of the
appliance on which the kit is installed. Please consult this
booklet for general warnings and fundamental safety
rules.
For a rapid and right assembly of the components follow
carefully the sequences described in the various sections.
All the operations must be performed by qualified person-
nel using the required Personal Protective equipment.
List of accessories
Metal casing:
• L01045II - Galvanized metal case for built-in installation for
SWI 400 models
• L01046II - Galvanized metal case for built-in installation for
SWI 600 models
• L01047II - Galvanized metal case for built-in installation for
SWI 800 models
exterior panel:
• L01092III - Aesthetic panel fully aligned with the wall for
SWI 400 models
• L01093II - Aesthetic panel fully aligned with the wall for
SWI 600 models
• L01094II - Aesthetic panel fully aligned with the wall for
SWI 800 models
Assembly the built-in installation kit
The kit can be installed in the vertical position only.
Installation arrangement
To install the unit, prepare the wall for housing the metal cas-
ing.
Make sure that the support wall is able to support the
weight of the appliance.
Make sure that the wall is not crossed by pipelines,
load-bearing construction elements or power lines.
L
H
P
