30
OEM DIAGNOSTICS
Scan All Systems
n
If you do not want to proceed, tap
Cancel
to cancel the erase procedure.
3.
If you chose to erase DTCs, an “
Erasing DTCs…
” message displays while the erase function is in progress.
n
If the erase was successful, a confirmation message shows. Tap
Scan Again
to re-scan the
currently selected module; or tap
Close
to exit and return to the test results screen.
n
If the erase was not successful, an advisory message shows. Make sure the tablet is properly
connected to the vehicle’s DLC, then tap
Try Again
to repeat the erase procedures.
━
Tap
Cancel
to cancel the erase procedure and close the message.
Viewing Live Data for a Selected Module
You can view Live Data for the currently selected module.
1.
While linked to the vehicle, start the engine.
2.
Select the module for which you wish to view Live Data. [
]
3.
Tap
Live Data
in the “Available Functions” menu to place the tablet in Live Data mode.
4.
The results screen displays all of the vehicle’s available PIDs with reported values. Each PID is unselected
to offer customization on which component you wish to select and explore further. A total PID count is
provided at the top left of the screen.
5.
Select the PIDs you wish to explore further and continue as desired:
n
Tap the
View
button to view PID data in a tabular format.
n
Tap the
Graph
button to view PID data in graphical format.
n
Tap the
Unselect
button to unselect all PID parameters.
n
Tap
Record
to record the selected Live Data PID(s) in real time.
NOTE:
Tapping the
Record
button without selecting any PIDs will record
all
of the
vehicle’s available PIDs.
n
Tap the
Available Functions
button to open its selection menu.