1
2
1
2
2. Connect the battery
connector from the
electric ride-on with
the connector from
the charger. Align
pins as they are
inserted together.
Pins must make full
contact. Make sure
pins do not bend.
3. Plug the charger
plug into a wall
outlet. The battery
will begin charging
with a red light on.
2206010
HOW TO CHARGE YOUR 6V BATTERY-POWERED POLICE CAR
1. Use Philips screwdriver to unscrew the seat cover. Lift seat cover to open. Battery with connector is located inside seat, and the
battery charger is stored inside seat.
HOW TO USE YOUR 2.4G REMOTE CONTROL
4. Once the vehicle is fully charged , unplug the charger and put it away in a safe place.
KEEP ALL CHARGERS AWAY FROM CHILDREN. USE THE CHARGER IN DRY LOCATIONS ONLY.
5. Plug the battery connector into the power connector. Your 6-volt Battery-Powered Police Car is now ready for play.
Do not store the battery in temperatures above
75ºF (23.5ºC) or below 32ºF (0ºC).
Battery Connector
Input AC 100-240V, 50/60Hz
Output DC 6V 500mA
Charger Connection
A
B
page 2
4. Your 6-Volt Battery-Powered Police Car comes with a 2.4G remote control for parents to operate the Police Car. When child is
in the Race car and parent is using the remote control to drive the vehicle, the remote control will overtake control of the Police
Car.
5. To pair your 2.4G remote control with your 6-Volt Battery-Powered Police Car, please point your 2.4G remote to your 6-Volt
Battery-Powered Police Car, and then slide to “ON” on the remote control. A red light will flash and sync with your vehicle. Once
the red light is no longer flashing and is on permanently, you can press the directional arrows to drive your 6-Volt
Battery-Powered Police Car.
6. To make emergency stops, press the STOP button on your 2.4G remote control and that will immediately cut off the power
supply for the motor engine of your 6-Volt Battery-Powered Police Car. To regain power, press the “ ” to turn ON power supply
and press directional arrows to operate the vehicle again.
Slide ON / OFF Switch to start pairing your 2.4G
remote control with your 6-Volt
Battery-Powered Police Car.
1
Press directional arrows to select where you
want to drive your 6-Volt Battery-Powered
Police Car.
2
Emergency ON / STOP Power Button to start or
stop your 6-Volt Battery-Powered Police Car.
3
3
2
1
CONNECT
INSERT PINS
Align pins as they
are inserted
together. Pins must
make full contact.
Make sure pins do
not bend.
6V Battery with
connector
Battery charger
with connector
Summary of Contents for KIDDIELAND 062547
Page 7: ......
