© MASS ELECTRONICS Pty Ltd 2011
Page 4
DS 13.05 - ISS0x - innTOUCH Smart Sensor
October 2018
FCC Class A Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Note – This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense.
Modifications to this device may void the authority granted to the user by the FCC to operate this equipment.
innTOUCH Smart Sensor Connection Diagram
Left Button
Centre Button
Right Button
Up
Down
Power ON/OFF
Primary Display
Secondary Display
1
innTOUCH Smart Sensor Parts Identification and Dimensions
Universal Input 2 (+) *
Universal Input 1 (+) *
Universal Input 3 (+) *
Universal Input 4 (+) *
Input Ground 0V *
innTOUCH Comms
(Power + Comms)
*Only available on ISS03 & ISS04 models
The Universal Inputs are for
Thermistor and Digital Input only
Button description
Power ON / OFF
– Turn innTOUCH ON or OFF
Up and Down
– Increase or decrease to adjust a value
Left Button
– Exit and return to previous menu (
)
Centre Button
– Enter, Save, Copy, or Delete function
Right Button
– Scroll through menus or parameters (
)
YOUR DISTRIBUTOR
Australian Owned, Designed & Manufactured
by Mass Electronics Brisbane
Phone:
+61 7 3421 9100
Fax:
+61 7 3421 9101
Email:
www.innotech.com
INNOTECH and the INNOTECH logo are registered and unregistered trademarks of Mass Electronics Pty Ltd in Australia, the USA and other countries.
